Loading ...
Loading ...
Loading ...
Faults – what to do? en
39
--------
Display indicates “E…”.
Electronics have detected a fault. Call the after-sales service.
~ "Customer service" on page 40
Appliance is not cooling, display and lighting are lit.
Showroom mode switched on. Start the appliance self-test.
~ "Appliance self-test" on page 40
When the programme has ended, the appliance
switches over to normal operation.
It is too warm or too cold in the cool-fresh compartment.
The standard setting has been set too high or low
(e.g. frost in the cool-fresh compartment).
You can set the temperature in the cool-fresh com-
partment to be 3 settings warmer or colder. If the
temperature in the refrigerator compartment is set
to setting 0, the cool-fresh compartment has a tem-
perature of around 0°C.
Note: A change to the standard setting will affect
the temperature in the refrigerator compartment and
freezer compartment.
1. Press and hold super button until the tempera-
ture display flashes.
2. Press ¾ / ¿ button to change the setting.
Setting –3 corresponds to the coldest setting.
Setting +3 corresponds to the warmest setting.
The selected setting is saved after one minute.
Loading ...
Loading ...
Loading ...