Dji ROBOMASTER Camera

User Manual - Page 7

For ROBOMASTER TT.

PDF File Manual, 26 pages, Read Online | Download pdf file

ROBOMASTER TT photo
Loading ...
Loading ...
Loading ...
ROBOMASTER TT TELLO TALENT User Manual
©
2020 Ryze Tech. All Rights Reserved.
7
If the aircraft's Vision Positioning system fails for 3 seconds when its ying altitude is
above 20 ft (6 m), Failsafe Protection will automatically initiate landing. If the Vision
Positioning system recovers during landing, Failsafe Protection will shut off and the
aircraft will hover.
The Vision Positioning System may not be able to recognize patterns on the ground in
very dark (< 300 lux) environments. DO NOT take off if there is a warning prompt in the
Tello app telling you that the environment is too dark.
Keep the cameras and sensors clean at all times. Dirt or other debris may adversely
affect their effectiveness.
Intelligent Flight Modes
The RoboMaster TT features Bounce mode, 8D Flips, Throw & Go, Up & Away, and EZ Shots. To
use an intelligent ight mode, ensure that the aircraft’s battery level is at least 50%, tap in the Tello
app, then select a mode.
Bounce Mode
In Bounce mode the aircraft automatically ies up and down between 1.6 and 3.9 ft (0.5 and 1.2 m)
above a at surface. If the aircraft detects an object below it (such as your hand) it increases its altitude
then continues ying up and down.
Using Bounce Mode
1. Press the power button once to turn the aircraft on. Launch the Tello app and tap
to take off.
2. Tap
and then select Bounce mode. Read the information prompt and then
select Start. The aircraft will start ying up and down.
3. Extend your arm and place your palm 1 ft (30 cm) or more below the aircraft,
keeping your palm open. The aircraft will increase its altitude then continue ying
up and down.
4. Tap
in the Tello app any time to exit Bounce mode.
Ensure there is sufcient space when using Bounce mode. Allow a radius of at least 7 ft (2 m)
horizontally around the aircraft and allow at least 10 ft (3 m) above the aircraft.
Before using Bounce mode ensure that the Aircraft Status Indicator is periodically blinking
green twice, indicating that the Vision Positioning System is available.
In Bounce mode, ensure your arm is extended and your palm is at. DO NOT try to
catch the aircraft. The distance between your palm and the aircraft should be at least 1
ft (30 cm).
Watch out for potential obstacles in your surrounding area (especially on the rear, left, and
right sides of the aircraft) and stay clear of them to avoid accidents.
Be prepared to take control of the aircraft by tapping
in the Tello app to exit Bounce
mode in case of an emergency.
Be extra cautious when ying in dark (< 300 lux) or bright (> 10,000 lux) environments.
Loading ...
Loading ...
Loading ...