Loading ...
Loading ...
Loading ...
ROBOMASTER TT TELLO TALENT User Manual
20
©
2020 Ryze Tech. All Rights Reserved.
By default the Tello does not have a Wi-Fi password. You can set a password and you can also
change the Wi-Fi SSID. (To reset the Wi-Fi SSID and password to the default settings, power
on the aircraft and then press and hold the power button for 5 seconds. The Tello will restart
automatically.)
In the More screen the beginner guide, units of measurement, photo quality, low battery warning,
and joystick settings can be congured. Tap
to calibrate the IMU or center of gravity, or to
view the aircraft rmware version.
4. Battery Level
60%
Displays the current battery level.
5. Wi-Fi Status
Displays the Wi-Fi connection status.
6. Bluetooth Status
Displays the Bluetooth connection status.
7.
Flight Speed
3m/s
Displays the aircraft’s horizontal speed.
8.
Flight Altitude
3m
Displays the altitude above the surface below the aircraft.
9.
Playback
Tap
to enter the playback page and preview photos and videos as soon as they are captured.
10.
Photo/Video Toggle
Tap
to switch between photo and video recording modes.
11.
Shoot / Record Button
Tap
/ to start shooting photos or recording video.
12.
Virtual Joysticks
Use virtual joysticks to control the aircraft. Two modes (Mode 1 and Mode 2) are available. The
default mode is Mode 2.
The virtual joysticks are used to control the aircraft’s orientation (yaw), forward/ backward movement
(pitch), altitude (throttle), and left/right movement (roll). The function that each virtual joystick
movement performs is determined by the choice of virtual joystick mode. Two modes (Mode 1 and
Mode 2) are available. The default mode is Mode 2.
In each of the two modes the Tello hovers in place at a constant orientation when both virtual
joysticks are centered. Pushing a virtual joystick away from the center position performs the
functions show in the gure below.
Loading ...
Loading ...
Loading ...