Loading ...
Loading ...
Loading ...
100 Servicing Your Honda
Inspection
1. Check the damper rod (1) operation.
The damper rod is fully extended and
compressed by hand. Release the damper rod,
then check that it extends to its maximum
length.
If the damper rod does not extend to its
maximum length, disassemble and inspection
for steering damper.
Refer to the Honda Service Manual or see
your dealer.
(1)
(1) damper rod
Removal
1. Remove the front visor (page 99).
2. Remove the steering damper mounting bolts
(1), collar A (2), collar B (3) and steering
damper (4).
(4)
(1)
(2)
(3)
(1) steering damper mounting bolts
(2) collar A
(3) collar B
(4) steering damper
5. Connect the headlight connector (3). Install
the front visor (2) by aligning its grommets
(7) with the tabs (8) on the steering stem.
Install and tighten the front visor bolts (1).
(8)
(7)
(2)
(3)
(2) front visor (7) grommets
(3) headlight connector (8) tabs
(1)
(1) front visor bolts
Steering Damper
Loading ...
Loading ...
Loading ...