Loading ...
Loading ...
Loading ...
Installation
1.
Attach the side collars to the wheel.
2.
On the right side, place the wheel
between the fork legs and insert the front
axle shaft, through the right fork leg and
wheel hub.
3.
Align the index line of the front axle shaft
with the recessed surface of the fork leg.
4.
Tighten the right axle pinch bolts.
Torque: 16 lbf·ft (22 N·m, 2.2 kgf·m)
5.
Tighten the front axle bolt.
Torque: 47 lbf·ft (64 N·m, 6.5 kgf·m)
6.
Install the brake caliper and tighten the
fixing bolts.
Torque: 23 lbf·ft (31 N·m, 3.2 kgf·m)
NOTICE
When installing a wheel or caliper into original
position, carefully fit the brake disc between the
pads to avoid scratching them.
7.
After installing the wheel, apply the brake
lever several times, then check if the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
20161223101558_31MFR6700_enu_BOOK Page 100 Friday, December 23 2016 10:19:27 JST
Tire Puncture u Removing Wheels
Troubleshooting
97
Continued
Index line
Recessed surface
Loading ...
Loading ...
Loading ...