Loading ...
Loading ...
Loading ...
6.
Remove the oil filter with a filter wrench
and let the remaining oil drain out. Make
sure the prior seal is not stuck to the
engine.
u Discard the oil and oil filter at an
approved recycling center.
7.
Apply a thin coat of engine oil to the
rubber seal of a new oil filter.
8.
Install the new oil filter and tighten.
Torque: 19 lbf·ft (26 N·m, 2.7 kgf·m)
9.
Install new sealing washers onto the drain
bolts. Tighten the drain bolts.
Torque: 22 lbf·ft (30 N·m, 3.1 kgf·m)
10.
Fill the crankcase with the recommended
oil (2 P. 51, 2 P. 134) and install the oil fill
cap/dipstick.
Required oil
When changing oil & engine oil filter:
3.9 US qt (3.7 L)
When changing oil only:
3.7 US qt (3.5 L)
11.
Check the oil level. 2 P. 68
12.
Check that there are no oil leaks.
20161223101558_31MFR6700_enu_BOOK Page 74 Friday, December 23 2016 10:19:27 JST
Engine Oil u Changing Engine Oil & Filter
Maintenance
71
Rubber seal
Oil filter
Loading ...
Loading ...
Loading ...