Loading ...
Loading ...
Loading ...
#
Headlight Bulb
1.
Remove the bolts from the headlight
case.
2.
Remove the headlight rim by pulling its
lower end forward and release the tabs.
3.
Remove the headlight by pulling it
forward and release the grommet.
4.
Disconnect the connector.
5.
Remove the seat rubber.
6.
Unhook the pin and remove the bulb.
7.
Install a new bulb and parts in the reverse
order of removal.
u
Install the seat rubber with its TOP
mark facing up.
Do not touch the glass surface with your
fingers. If you touch the bulb with your bare
hands, clean it with a cloth moistened with
isopropyl (rubbing) alcohol.
20161223101558_31MFR6700_enu_BOOK Page 108 Friday, December 23 2016 10:19:27 JST
Electrical Trouble u Burned-out Light Bulb
Troubleshooting
105
Continued
Headlight
Bolt
Connector
Headlight
case
Bolt
Tabs
Grommet
Headlight
rim
Bolt
Seat
rubber
TOP mark
Bulb
Pin
Loading ...
Loading ...
Loading ...