Loading ...
Loading ...
Loading ...
Installation
50
Uneven installation surfaces
If the installation surface is uneven and
therefore making flush installation
difficult, the frame can be realigned.
Fit the rangehood as described on
the installation sheet.
Warning! Danger of electric shock!
Disconnect the rangehood from the
mains electricity supply before
removing the lamps (see “Warning
and Safety instructions”).
Using the suction cup supplied, pull
the lamp out of its holder.
Remove all other lamps in the same
way.
Fit one of the screws supplied into
the eyelet of the fixing tab located
inside each lamp opening as
depicted in the diagram above.
Tighten the screws with a screwdriver
until the frame sits flush with the
installation surface.
Do not overtighten the screws.
Refit the lamps.
Loading ...
Loading ...
Loading ...