Loading ...
Loading ...
Loading ...
Operation (automatic and manual modes)
33
Operating hours counter
The rangehood registers the length of
time it has been operated.
When the grease filter symbol or the
charcoal filter symbol lights up, the
operating hours counters are signalling
that the filters need to be cleaned or
replaced. Further information about
cleaning and replacing the filters and
resetting the operating hours counters
can be found under “Cleaning and
care”.
Altering the grease filter operating
hours counter
You can set the operating hours counter
to suit the type of cooking you do.
It is set at the factory for 30hours.
– Select a shorter time of 20hours if
you fry a lot.
– If you only cook occasionally, we
recommend that you still select a
short time for the counter. This is to
prevent grease from hardening on the
filters and making cleaning more
difficult.
– If you use very little fat for cooking,
you can select a longer time
(40-50hours).
Switch off the fan and the lighting.
Press the control and the
operating hours control at the
same time.
The grease filter symbol and one of
the fan power setting indicators will
flash.
The fan power setting indicators 1 to B
show the time set:
1............................................... 20 hours
2............................................... 30 hours
3............................................... 40 hours
B .............................................. 50 hours
Press the control for a shorter
duration, or for a longer duration.
Confirm your selection by pressing
the operating hours control .
All the indicator lights will go out.
If you do not confirm your selection
within 4minutes, the rangehood will
automatically revert to the previous
setting.
Loading ...
Loading ...
Loading ...