Loading ...
Loading ...
Loading ...
MK / MKT (E5) 08/2020 page 9/162
1.5 Localization / position of safety labels on the chamber
The following labels are located on the chamber:
Pictograms (Warning signs)
Hot surface (on chamber door)
Cold surface (on chamber door)
Electrical hazard
(chamber with voltage and fre-
quency changer: on the voltage
and frequency changer)
Service label
Figure 1: Position of labels on the chamber
Keep safety labels complete and legible.
Replace safety labels that are no longer legible. Contact BINDER service for these replacements.
1.6 Type plate
The type plate sticks to the left side of the chamber, bottom right-hand, above the refrigerating module.
Figure 2: Type plate (example of MKT 240 regular chamber)
Nominal temp.
180 °C
6,50 kW / 11,3 A
Max. operating pressure 29 bar
356 °F
400 V / 50 Hz
Stage 1: R 452 A – 2,20 kg
IP protection
20
Stage 2: R 23 - 0,38 kg
Safety device
DIN 12880
3 N ~
Contains fluorinated greenhouse gases
Class
2.0
covered by the Kyoto Protocol
Art. No.
9020-0230
Project No.
Built
2020
Alternating climate chamber
BINDER GmbH
Im Mittleren Ösch 5
78532 Tuttlingen / Germany
www.binder-world.com
MKT 240
E5
Serial No. 00000000000000
Made in Germany
Loading ...
Loading ...
Loading ...