Loading ...
Loading ...
Loading ...
83
Troubleshooting
Shooting Still images/Movies
Symptom Cause Solution
The LCD screen does not
light when the power is
turned on.
• The power was turned off with the LCD screen
set to [OFF] the last time the camera was used.
p Turn the LCD screen [ON] (page 32).
The subject is not visible
on the LCD screen.
• The mode dial is not set to or SCN, or . pSet it to or SCN, or (pages 26, 74).
The image is out of focus. • The subject is too close.
• Scene selection is set to the Landscape mode.
• You have selected Focus Preset.
• Center AF is selected.
p Set the macro recording mode (DSC-P71 only) when you shoot
a subject that is within 50 cm (19
11
/
16
inches) from the lens.
Make sure to place the lens farther away from the subject than
the shortest shooting distance when shooting (page 28).
p Cancel the setting (page 34).
p Choose a focus method (page 58).
p Use either the Multipoint AF (page 58) or Center AF to shoot
with AF lock (page 59).
Unable to zoom. • You cannot zoom while shooting a movie
(MPEG MOVIE) (DSC-P71/P31 only).
—
Digital zoom does not
function.
• You cannot zoom while shooting a movie
(MPEG MOVIE).
• [DIGITAL ZOOM] is set to [OFF] in SET UP
(DSC-P71/P51 only).
• The LCD screen is OFF.
—
p Change it to [ON] (pages 55, 97).
p Turn it ON (page 32).
The image is too dark. • You are shooting a subject with a light source
behind the subject.
• The brightness of the LCD screen is too low.
• The POWER SAVE is set to ON.
p Adjust the exposure (page 56).
p Adjust the brightness of the LCD screen in the SET UP settings
(pages 55, 98).
p Turn the POWER SAVE to OFF (page 16).
The image is too bright. • You are shooting under a spotlight in a dark
location, like stage lighting.
• The LCD is too bright.
p Adjust the exposure (page 56).
p Adjust the [LCD BACKLIGHT] in the SET UP settings (pages
55, 98).
The image is
monochrome (black and
white).
• [P. EFFECT] is set to [B&W] mode. p Cancel [B&W] mode (page 60).
Loading ...
Loading ...
Loading ...