Loading ...
Loading ...
Loading ...
24
INSTALLATION GUIDE
SAFETY
• Only qualified personnel should install this appliance. This installation manual is
intended for use by individuals possessing adequate backgrounds and qualifications
in electrical, electronic, refrigerant and mechanical fields. Any attempt to install or
repair the appliance may result in personal injury and property damage.
• The manufacturer and retailer cannot be responsible for the interpretation of this
information, nor can it assume any liability in connection with its use.
• The units are designed for permanent installation.
• The equipment is designed for domestic or office use and we are not making any
endorsements for use in industrial or maritime environment.
• Do not place near sources of heat, vapors, industrial machine oil or other flammable
gases.
• High-frequency waves generated by radio equipment, welders and medical
equipment will interfere with the normal operation of the unit.
• Install this device only when it complies with local/national legislation, ordinances
and standards.
• Check the mains voltage and frequency. This unit is only suitable for an earthed
electrical supply, connection voltage 230 V~ / 50 Hz. The information, specifications
and parameter are subject to change due to technical modifications or improvement
without any prior notice. The accurate specifications are presented on the nameplate
label.
• Please read this installation manual completely before installing the product.
• When the power cord is damaged, replacement work shall be performed by
authorized personnel only.
• Installation work must be performed in accordance with all European, national and /
or local directives and standards and must be done by authorized personnel only.
• Always make sure to wear the correct personal safety protections such as protective
eyewear, gloves, ear protection etc.
• This air conditioner contains a refrigerant and can be classified as pressurized
equipment. Therefore always contact an authorized air conditioning engineer for
installation and maintenance of the air conditioner.
• The air conditioner must be inspected and serviced on an annual basis by an
authorised air conditioning engineer.
• Each indoor unit has a separate refrigerant circuit, and as such each circuit must be
individually pressure tested and purged during installation.
Loading ...
Loading ...
Loading ...