TSP500-M User Manual

Loading ...

ENG

ENGLISH

ENTERTAINMENT

Connecting to a Wired Network

Connect the display to a local area network (LAN)

via the LAN port as shown on the following illustra-

tion and set up the network settings.

It only supports wired network connection. After

making a physical connection, a small number of

networks may require the display network settings

to be adjusted. For most networks, the display will

connect to automatically without any adjustments.

For detail information, contact your internet pro-

vider or router manual.

To set up the network settings: (Even if your dis-

play has already connected automatically, running

setup again will not harm anything),

1 Press SETTINGS to access the main menus.

2 Press the Navigation buttons to scroll to NET-

WORK and press OK.

3 Press the Navigation buttons to select Net-

work Setting and press OK.

4 If you already set Network Setting, select

Resetting. The new connection settings resets

the current network settings.

5 Select IP Auto Setting or IP Manual Setting.

- If selecting IP Manual Setting, press the

Navigation and Number buttons. IP address-

es will need to be input manually.

- IP Auto Setting: Select this if there is a

DHCP server (Router) on the local area net-

work (LAN) via wired connection, the display

will automatically be allocated an IP address.

If you’re using a broadband router or broad-

band modem that has a DHCP (Dynamic

Host Configuration Protocol) server function.

The IP address will automatically be deter-

mined.

6 When you are finished, press EXIT.

LAN

Router

LANWAN

Cable modem

ETHERNET

Internet

 Network setting menu will not be avail-

able until the display connected to physical

network.

 Since there are various connection meth-

ods, please follow the specifications of your

telecommunication carrier or internet service

provider.

CAUTION

 Do not connect a modular phone cable to the

LAN port.