Loading ...
Loading ...
Loading ...
30
ACTIVESMART™ OPERATING INSTRUCTIONS
Bottle holder (where fitted)
The bottle holders can be used to store a variety of bottles.
To position the bottle holder in your refrigerator, slot the back edge of the bottle holder
onto the back trim of any shelf in the fresh food compartment.
Unused bottle holders can be stacked up on top of one another so they do not take up
unnecessary shelf space.
Bottles are best stored with the neck of the beverage facing the front of the refrigerator.
Glass shelves
Standard glass shelves can not be repositioned in your refrigerator. Refer to ‘Cleaning
and care’ for details on how to remove the standard
glass shelves for cleaning.
Cantilever glass shelves — half-width and full-width
The cantilever glass shelves are designed to be
strong and versatile.
The half-width and full-width shelves are removable
and can be repositioned in your refrigerator.
Place the half-width shelves side-by-side when you
store large items such as platters.
Place the half-width shelves at different levels to
maximise the storage space when you store items of
varying heights.
To remove for repositioning
1
Hold the front and back edge of the shelf firmly
(refer to A).
2
Push the shelf up vertically to dislodge from back
support lugs (refer to B).
3
Slide the shelf towards you (refer to C).
Drip tray (Water dispensing models
only)
The drip tray is designed to fit into
the bottom of the water dispenser
panel.
To insert the tray ensure the rounded
sides are fitted into the dispenser
panel first.
The purpose of the tray is to capture
drips of water that may fall after
dispensing.
The tray can be removed for cleaning.
Drip tray
A
B
C
Loading ...
Loading ...
Loading ...