Loading ...
Loading ...
Loading ...
32
GB
2 Turn the TV on, and then
switch the input of the TV to
the input to which the
receiver is connected.
3 Press (power) to turn on
the receiver.
The Easy Setup screen is displayed on
the TV.
You cannot perform Easy Setup without
connecting a TV to the receiver.
• When you turn on the receiver after the receiver
is initialized, the Easy Setup screen also appears
on the TV.
• To turn off the receiver, press (power) again.
To display the Easy Setup screen
manually
1 Press HOME.
The home menu is displayed on the TV
screen (page 43).
2 Press / to select [Easy Setup], and
then press .
You can select the language of messages
on the screen.
Press / to select your
language, and then press .
The Auto Calibration function allows you
to:
• Check the connection between each
speaker and the receiver.
• Adjust the speaker level.
• Measure the distance of each speaker
from your seating position.*
• Measure the speaker size.*
• Measure the frequency characteristics
(EQ).*
* The measurement result is not utilized when
[Direct] is selected for the sound field setting
and an analog input is selected.
• The speakers emit very loud sound during the
measurement and the volume cannot be
adjusted. Be considerate of your neighbors and
any children who are present.
• If the muting function has been activated before
you perform Auto Calibration, the muting
function will shut off automatically.
• It may not be possible to take the correct
measurements or to perform Auto Calibration at
all if special speakers such as dipole speakers
are used.
Note
Tip
2. Selecting the language
3. Performing Auto Calibration
Note
Before you perform Auto
Calibration
Check the following items:
• Disconnect the headphones.
• For accurate measurement, make
sure the environment is quiet and
free from noise.
• Set the speaker output to a setting
other than “OFF SPEAKERS” using
SPEAKERS button (page 46).
Loading ...
Loading ...
Loading ...