Loading ...
Loading ...
Loading ...
7. Install screws and shroud retainer grommets into the side tubes of the tower frame using a Phillips screwdriver.
Item Description Qty.
1 Grommet, Shroud Retainer 6
2 Screw, M4.2 x 0.7, Phillips 6
Tighten hardware to 10-13 in-lb (1.1-1.5 Nm).
8. Slide weight stack cushions onto the guide rods.
9. Place guide rods with weight stack cushions into the holes at the bottom of the tower frame.
Item Description Qty.
1 Guide Rod 2
2 Weight Stack Cushion 2
Page 17 of 34
Loading ...
Loading ...
Loading ...