Loading ...
Loading ...
Loading ...
2. Slide increment weight guide rods through the top of the tower frame and down through the clips in the increment weight. Place
increment weight guide rods into holes at the bottom plate of the tower frame.
Item Description Qty.
1 Increment Weight Guide Rod 2
2 Increment Weight 1
3. Thread increment weight guide rods into the bottom plate of the tower frame. Tighten using a crescent wrench.
Item Description Qty.
1 Increment Weight Guide Rod 2
4. Install washers and locknuts securing the increment weight guide rods to the top plate of the tower frame using a 7/16" wrench.
Item Description Qty.
1 Nut, ¼" Nylock 2
2 Washer, Flat ¼" ID 2
3 Increment Weight Guide Rod 2
Tighten hardware to 16-20 in-lb (1.8-2.2 Nm).
Page 15 of 34
Loading ...
Loading ...
Loading ...