Loading ...
Loading ...
Loading ...
18
Daily Use
1. Open the door and Press the ON/OFF button to turn the dishwasher on.
*The display will show the wash programme time．
3. Press to start the programme and close the door.
2.Press to select the program you want on the dishwasher control panel.
NOTICE
Start a Programme
If the MEMO MODE YES．The appliance remembers the last programme
you used. The next time the appliance will switch on, the appliance pre-selects
the programme last used.
Set a start time by the following procedure in order to delay a programme start:
1.Set a programme.
2.Press and hold the reservation button until the display flashes the required
delay time (from 1 to 24hours).
*The LED molds delay time is 3h,6h,9h.
3.Press the START/PAUSE button and close the door.
The display shows the countdown of the start delay. The countdown decreases
with steps of 1 hour.
When the countdown is completed, the programme starts.
Start a Programme with Delay
Pause and restart a wash programme
1. Open the door carefaly to pause the programme.The time remaining will flash
and the pause beep will sound while the dishwasher is paused.
NOTICE
There is a risk of being sprayed with hot water,do not fully open the door until
the spray arms have stopped rotating.
2.Load,remove,or rearrange any dishes if needed.
3.Close the door to restart the programme.
Cancel or change a wash programme
Open the door carefully to pause the programme.Press and hold 3 sec,
Washing program reset.And then you can choice a new wash programme to start.
Loading ...
Loading ...
Loading ...