Loading ...
Loading ...
Loading ...
16
Before
first Use
► If you want to change the Rinse AId setting, press to change the setting in
steps between R1 ( minimum dispense) and R4 ( maximum dispense).
►
If you want to activate/de-activate the buzzer, Press to toggle Buzzer
On (LED on) or Buzzer OFF (LED off).
3.Press and hold the for 3S to save the setting and exit the setting mode.
How to Adjust User Preference Settings for LED Models
During the selection of programmes, press and hold for about 5 seconds
to enter
the user preference settings. User preference settings include Water Softener
setting,Buzzer setting,Rinse Aid setting and Memo Mode setting.
1.The appliance is switched on.
2. Press and hold the for 5S to enter the user setting mode, and all LEDs will
flash for 1s and then turn off. If you want to adjust the water softener, press
to scroll the setting between S1 and S6 (the default is S4) as the table below:
P1 P2 P3 P4 Zoom
Sx level
0 0 0 0 0
S1
1 0 0 0 0
S2
1 1 0 0 0
S3
1 1 1 0 0
S4
default
1 1 1 1 0
S5
1 1 1 1 1
S6
3h
6h
9h
Rx level
0 0 0
R1 Empty
1 0 0
R2 3ml
1 1 0
R3 5ml default
1 1 1
R4 6ml
The LED displays as follows:
►
If you want to Turn On/Turn Off the Memo Mode, press as follows:
Salt/Rinse symbol
Memo mold
0
OFF default
1
ON
Loading ...
Loading ...
Loading ...