Loading ...
Loading ...
Loading ...
18
The 7.0 S is an easy product to set up and use, from the adjustments to
the intuitive interface. This section explains how to set up, adjust and
operate your 7.0 S.
Leveling the 7.0 S
• Once the 7.0 S is assembled, and placed on a at level oor, it may
be necessary to adjust the leveling glides on the bottom of the unit
to ensure proper stability of the 7.0 S. Use a 1/2” wrench to loosen
the top nut of the levelers. Make sure the two center levelers are
screwed all the way in. Adjust the 4 corner levelers by hand as necessary
to remove any wobble in the unit. Unscrew the 2 center levelers until
they touch the oor. Then tighten all the top nuts against the
bottom of the stabilizer tubes. Make sure the bottom nut remains
cinched against the leveling foot.
Connecting to A.C. power
• The 7.0 S uses a universal switching power supply. You can plug the
7.0 S power supply into any A.C. power source from 100 to 240 volts,
50 to 60 Hz. The A.C. input is located in the front of the unit.
Seat adjustments
Seat position number
lines up with front
edge of seat carriage
Seat back angle
indicator
Lift handle to rotate
seat. Lower handle to
activate latch
Loading ...
Loading ...
Loading ...