Loading ...
Loading ...
Loading ...
Utility stitches
45
VARIOUS STITCHES
3
f
Remove about 5 cm (2 inches) from the end of the
basting on the outside.
g
Attach the presser foot holder to the right pin of zipper
foot “I”.
h
Select a stitch.
• For details, refer to “Stitch Chart” on page 33.
i
Topstitch around the zipper.
1 Stitching
2 Right side of fabric
3 Basting stitching
4 End of zipper opening
j
Remove the basting stitching.
Appliqué, Patchwork and Quilt Stitching
■ Appliqué stitching
a
Baste or glue the appliqué piece to the base fabric to
secure it.
b
Attach the zigzag foot “J”.
c
Select a stitch.
• For details, refer to “Stitch Chart” on page 33.
*1 For the 16 stitches model, select stitch “04”, and use
the reinforcement stitch button. Do not use reverse
stitching.
1 Wrong side of fabric
2 Zipper basting
3 Outside basting
4 5 cm (2 inches)
1 Pin on the right side
2 Needle drop point
Stitch
No.
03 03 03 02
CAUTION
• When using zipper foot “I”, be sure to select
the straight stitch (middle (center) needle
position), and slowly turn the handwheel
toward
you (
counterclockwise)
to check that
the needle does not touch the presser foot. If a
different stitch is selected or the needle hits
the presser foot, the needle may bend or
break.
4
1
2
3
2
1
I
80
stitches
60
stitches
50
stitches
16
stitches
1
2
3
4
CAUTION
• When sewing, be sure that the needle does not
touch the zipper, otherwise the needle may
bend or break.
Memo
• If the presser foot contacts the zipper slider, leave the
needle lowered (in the fabric) and raise the presser foot.
After moving the slider so it will not contact the presser
foot, lower the presser foot and continue sewing.
Note
• If glue is used to hold the appliqué in place on the
fabric, do not apply glue to areas that will be sewn with
the machine. If glue adheres to the needle or bobbin
case, the machine may be damaged.
Stitch
No.
18 16 16
–
*1
19 17 – –
23 21 20 11
24 22 21 –
80
stitches
60
stitches
50
stitches
16
stitches
Loading ...
Loading ...
Loading ...