Loading ...
Loading ...
Loading ...
LCD Operation
10
When the machine is turned on, the LCD will light up and the following screen is displayed.
To change the displayed settings, use the operation keys and stitch pattern selection dial.
The LCD differs depending on the model.
LCD Operation
No. Display Item Name Explanation Page
1 Presser foot Shows the symbol for the presser foot to be used. Before sewing, attach one of the
presser feet shown here.
21
Zigzag foot “J” Buttonhole foot “A”
Monogramming foot “N” Blind stitch foot “R”
Overcasting foot “G”
* The symbols for certain presser feet, such as zipper foot “I” and the quilting foot,
may not appear in the screen.
2 – Stitch number Shows the number of the currently selected stitch pattern. 33
3 Needle position setting Shows whether the needle is in the programmed raised or lowered position. In
addition, shows whether the single needle mode or twin needle mode is selected.
(The twin needle mode indicator appears only on models equipped with the needle
mode selection key.)
11
: Single needle/down position : Twin needle/down position
: Single needle/up position : Twin needle/up position
4 Stitch length Shows the stitch length of the currently selected stitch pattern. 27
5 Stitch width Shows the stitch width of the currently selected stitch pattern. 27
6 Automatic reverse/
reinforcement stitching
Shows the automatic reverse/reinforcement stitching is currently turned on. 25
Memo
• On models without the stitch number and the presser foot displayed in the LCD, the stitch number and presser foot are
shown in the stitch pattern display window.
ba c d
f e
c d
f e
1 Stitch number
2 Presser foot
a
b
Loading ...
Loading ...
Loading ...