Loading ...
3
2
READ ME FIRST
GAS LEAK TESTING
It is important that you leak test the BBQ before first use and every time the gas cylinder is refilled and
reconnected to the BBQ.
To Complete Leak Test
• Make sure all the control knobs are OFF.
• In a small container, mix up a solution of water and detergent/soap.
• Mix the solution well (about the same concentrate as washing up water).
• Turn the cylinder ON by rotating the knob anti-clockwise.
• Using a brush or spray bottle apply the soap solution to the gas line and each join in the gas line including:
- the gas connection at the inlet of the BBQ
- all gas hose connections
- the gas connection at the gas cylinder
• If bubbles appear, there is a gas leak.
• If the leak is at the hose connection, re-tighten and re-seal.
• If the leak is anywhere else or you cannot resolve the leak by tightening the connection DO NOT PROCEED.
• Turn the gas cylinder off clockwise.
FOR OUTDOOR USE ONLY
WARNING: Improper installation, adjustment,
alteration, service or maintenance can cause injury
or property damage.
Read the instructions thoroughly before installing or
servicing this equipment.
Loading ...
Loading ...
Loading ...