Loading ...
Loading ...
Loading ...
8
STEAM MOP ASSEMBLY
Before using your steam mop:
Remove all packaging and lay out the separate components.
Check the steam mop after unpacking for any visual damage such as:
• Misaligned or damaged parts
• Damage to the main body and separate components
• Damage to the plug or cable.
If you can see any damage do not use the steam mop and refer page 15.
Note: Before assembling/disassembling any parts of the product make sure
the unit is unplugged and has cooled sufficiently.
Handle assembly
The handle comes in 2 parts:
• Handle top
• Handle tube
1. Fit the handle top onto the handle tube, applying a small amount of
pressure until you hear it ‘click’ into place.
2. Once this is secure, put the assembly into the top of the main unit with
the cord hook parallel to the back of the unit. Push the tab on the base to
allow the handle to fully insert and secure. This should ‘click’ into place.
3. If you wish to remove the handle, simply push the release button on the
front of the unit and lift the assembly upwards.
Loading ...
Loading ...
Loading ...