Loading ...
Loading ...
Loading ...
10
FILLING THE WATER TANK
Note: Before filling/re-filling the water tank, unplug the steam mop.
Do not touch any hot parts before allowing them to cool sufficiently.
1. Tilt the steam mop so that the tank is at an easy angle for filling.
2. Pull open the cap on the water tank.
3. Fill the provided measuring jug with water, being careful not to spill any
liquid.
Note: It is recommended to use treated water in your steam mop, especially in
hard water areas. Water can be treated using water filters. Using untreated
hard water can reduce the performance and life span of your product. Never
use boiled water in your steam appliance. This is harmful as the boiled water
that has not turned to steam contains solely the hard water minerals that
should be avoided.
4. Use the jug to fill the tank to below the water tank cap.
5. Close the cap on the tank so that it is secure. Lift the mop upright.
A full tank should provide approximately 15 minutes steam time. The mop will
not steam if you do not turn on the power and wait sufficient time for the
water to heat.
Loading ...
Loading ...
Loading ...