User Manual JBL Clip 3 Portable Bluetooth Speaker

You should receive up 10 hours of audio playback. (varies by volume level and audio content)

Press the power button located on the top right of the speaker.
If this is your first time pairing the device, the speaker will automatically go into pairing mode.
Make sure that the product you are attempting to pair to is in search mode and in bluetooth range
.
The Clip 3 should pop up on discoverable devices within a few seconds.
Choose the Clip 3 option and you will be connected within a few seconds.

• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.

In Power On mode, press and hold 'Volume+' together with 'Play/Pause' for more than 2 seconds. The speaker will power off and is now reset.