User Manual - Page 18

For WBE5304BC-L. Also, The document are for others Westinghouse models: WTB4600, WTB4604, WTB5400, WTB5404, WBE4500, WBE4502, WBE4504, WBE5300, WBE5304, WRB5004, WFB4204, WHE5204, WHE5264, WQE6060, WQE6000, WHE6060, WHE6000

Loading ...
Loading ...
Loading ...
1. Empty food from the drawer.
2. Remove the drawer by pulling it forward and lifting the
front to unhook it from the slides. Once you have
removed the drawer, ensure the slides are pushed back
so they are fully closed.
WARNING
Never close the door while the telescopic slides are
extended. This may damage the slide and/or refrigerator or
cause the slide to become disengaged from the refrigerator.
To replace the drawer:
1. Ensure the telescopic slides are pushed in all the way.
2. Slide the drawer into place over the slides and push the
bin in until it stops.
3. Drop drawer into position.
Freezer bottom bin
To remove the bin, pull the drawer out until it is open all the
way then lift bin out from the front of the bin. When
refitting insert the rear of the bin first then lower into
position.
When replacing the bins after cleaning, we recommend
fitting the lower bin first.
CAUTION
Never close the door while the telescopic slides
are extended. It may damage the slide and/or the
refrigerator or cause the slide to become disengaged
from the refrigerator.
T
wist and Serve Ice
Mounting the twist & serve dispenser t
o the other side of the
freeze
r
.
NOTE:
this is only possible on Top mount models.
2. Before you remove the ice carriage, remember to
disengage it from the glass shelf
as it may result in
damage to the assembly.
3. Remove the centre runner by disengaging it at the front
of the shelf, and removing it from the rear.
4. Refit the runner into the rear of the shelf on the right
hand side and then engage the front.
Insert into the slot at the rear
of the shelf
Then engage into the front of
the shelf
5. Fit the carriage by sliding it into the runners until the front
if the carriage engages with the shelf.
6. Refit the ice tray and ice bin.
WARNING
Fill the ice cube tray with potable water only.
1. Remove the ice bin and ice cube tray. If the ice tray
assembly is frozen too the carriage , simply squeeze the
tray and shelf together to break the ice.
REMOVING FEATURES
Drawers fitted with telescopic slides
To remove the drawer for cleaning.
18 REMOVING FEATURES
Loading ...
Loading ...
Loading ...