Loading ...
Loading ...
Loading ...
Aircraft
Phantom 4
User Manual
26
©
2017 DJI All Rights Reserved.
01
Point the aircraft toward the screen
02
Align the boxes
03
Pan and tilt the aircraft
Calibrating Front Sensors
Obstacles Sensing cameras that installed on landing gear are calibrated on delivery. However these
camera are vulnerable to excessive impact, hence it will require calibration via DJI Assistant 2 from time
to time. Follow the steps below to calibrate the camera when the DJI GO 4 app prompt you to do so.
Using Vision Positioning
Vision Positioning is activated automatically when the aircraft is turned on. No further action is
required. Vision Positioning is typically used in indoor environments, where GPS is unavailable.
Using the sensors that are built into the Vision Positioning system, the aircraft can hover precisely
even without GPS.
Follow the steps below to use Vision Positioning:
1. Toggle the ight mode switch to P-mode.
2. Place the aircraft on a at surface. Note that the Vision Positioning system cannot work
properly on surfaces without clear pattern variations.
3. Turn on the aircraft. The aircraft status indicator will flash green two times, which
indicates the Vision Positioning system is ready. Gently push the left stick up to lift off
and the aircraft will hover in place.
ON OFF
Auto Hold
Loading ...
Loading ...
Loading ...