Loading ...
Loading ...
Loading ...
Page 9
5. Set the time on the speed 1 and speed 2 timers. See Figure 9-1.
NOTE: Time on the speed 1 and speed 2 timers can be set from
30 seconds up to 20 minutes.
6. Press the SPEED 1 button to pre-mix the ingredients at low speed.
See Figure 9-2.
Always start the mixer in speed 1 in order to blend
the ingredients. Starting the mixer in speed 1
reduces the risk of airborne our dust which can
cause difculty breathing.
NOTE: Once the SPEED 1 button is selected, the speed 1 timer
display and SPEED 1 button will illuminate. The
speed 2 timer will no longer illuminate.
NOTE: In speed 1, it is possible to reverse the direction
of the bowl to “mix in” any unblended our from
the bottom of the bowl into the dough. Use the
REVERSE dial to change the bowl direction from
counterclockwise to clockwise. See Figure 9-3.
REVERSE dial must only be used long enough
to blend all of the unblended our from the
bottom of the bowl. Return the bowl back to the
counterclockwise direction as soon as possible.
Failure to do so can cause mechanical overload
on the transmission and overheat the motor
windings.
7. Once the speed 1 timer time has expired, the mixer will
automatically switch to speed 2. Speed 2 will continue until the
time on the speed 2 timer has expired.
NOTE: After the speed 1 timer has expired, the speed 2 timer
display and SPEED 2 button will illuminate. The speed
1 timer display and SPEED 1 button will no longer
illuminate.
NOTE: To add additional ingredients or to pause the time on the speed
1 or speed 2 timers, lift the bowl guard. The mixer will stop. To
continue the time on the timer, lower the bowl guard and press
the SPEED 1 or SPEED 2 button that was enabled at the time of
stopping.
Do not add our through the bowl guard. Damage to bowl
guard can occur.
Do not add our through the bowl guard. Lift the bowl guard
to stop the mixer and add the appropriate amount of our.
Adding our through the bowl guard may increase the risk of
airborne our dust which can cause difculty breathing.
8. When the ingredients have been thoroughly mixed, press the STOP button to
stop the mixer. See Figure 9-4.
NOTE: The mixer will automatically stop when the time on the speed 1 or speed 2 timer has expired.
NOTE: If in the middle of the mix cycle, the STOP button or the red EMERGENCY button is pressed, the
mixer will stop. The time on the timers will then return to the initial time set.
Operating Instructions
Speed 1
Timer
Speed 2
Timer
Figure 9-1.
SPEED 1 SPEED 2
Figure 9-2.
Figure 9-3.
Figure 9-4.
Counterclockwise
Clockwise
Loading ...
Loading ...
Loading ...