Loading ...
Loading ...
Loading ...
47
GB
Getting Started
6: Preparing the receiver
and the remote
Connect the supplied AC power cord (mains
lead) to the AC IN terminal on the receiver,
then connect the AC power cord (mains lead)
to a wall outlet.
Notes
• Before connecting the AC power cord (mains
lead), make sure that metallic wires of the speaker
cords are not touching each other between the
SPEAKERS terminals.
• Connect the AC power cord (mains lead) firmly.
A several space is left between the plug and the
rear panel even when the power cord (mains
lead) is inserted firmly. The cord is supposed
be connected this way. This is not malfunction.
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to return settings you have made to
their factory defaults.
1 Press POWER to turn off the
receiver.
2 Hold down POWER while
pressing TONE MODE and
HDMI IN to turn on the receiver.
3 Release the TONE MODE and
HDMI IN after a few seconds.
After “MEMORY CLEARING...”
appears on the display for a while,
“MEMORY CLEARED.” appears.
All the settings you have changed or
adjusted are reset to the initial settings.
Note
It takes about 30 seconds for the memory to be
cleared completely. Do not turn the receiver off until
“MEMORY CLEARED.” appears on the display.
Connecting the AC power cord
(mains lead)
AC IN terminal
To the wall outlet
AC OUTLET
(USA/Canadian
model only)
AC power cord
(mains lead)
(supplied)
Performing initial setup
operations
POWER
TONE MODE HDMI IN
Loading ...
Loading ...
Loading ...