Loading ...
Loading ...
Loading ...
23
EN
COFFEE DISPENSING
Make sure that the switch-on/supply button lights up
to a steady white light.
Never put fingers or objects in the pod-holder.
Only compatible capsules must be introduced in the
pod-holder.
Single-dose capsules are prepared to dispense one
coffee/product. DO NOT use the capsules more than
once. Inserting two or more capsules can cause the
machine to malfunction.
To always have a coffee at the perfect temperature,
it is recommended to preheat the cup with hot water.
Position the cup under the dispensing spout without
inserting the capsule. Press the switch-on/supply but-
ton to supply hot water enough to pre-heat the cup.
Place the cup under the coffee dispenser for a classic
espresso.
PREPARING THE COFFEE
Remove the drip tray to use cups of different sizes for
a long coffee.
If, during the dispensing cycle power supply is inter-
rupted or water is exhausted within the tank proceed
as follows:
- Restore the power supply or fill the water tank up to
the indicated MAX level.
- Press the switch-on/supply button and wait for the
button to light up to a steady white light.
- Replace the pod inside the pod fitting compartment
with a new one.
- Restart the coffee dispensing.
After 5 supplies the power-on/coffee supply button
starts blinking fast with white light to indicate that the
spent capsule drawer is filled. Empty the spent capsule
drawer and press the button to reset the coffee machi-
ne. Now the machine is ready for a new supply.
Loading ...
Loading ...
Loading ...