Loading ...
Loading ...
Loading ...
Remote Control:
5
1 Temp Up Button
Increases the set temperature value
2 Mode Button
Toggles between the three heat modes available
3 Temp Down Button
Decreases the set temperature value
4 Power Button
Powers the heater on or off
5 Ambient/Lock Button
Short press: Shows Ambient temperature.
Long press for 3 seconds to activate lock function.
6 Timer Button
Engages the on/off timer
Operating Instructions:
1. Turn the heater on or off by pressing the POWER
button on the control panel (Figure C) or by pressing
the ON/OFF button on the remote control (Figure B).
Note: Once the power is off, the internal heating
elements will stop working first. The fan will continue
working for up to 90 seconds to deliver residual heat
from inside the heater. This is a normal function.
2. Select a heat setting by pressing the MODE button on
either the control panel (Figure C) or the remote control
(Figure B) to toggle between the three heat settings.
Power for HIGH mode is 1,500W while the power for
LOW mode is 1000W. ECO mode is an Economic Energy
Saving Function. When ECO mode is chosen, the heater
will operate to maintain a constant temperature of
68° Fahrenheit.
The ECO LED light will only illuminate when the ECO
function is active and the room temperature falls
below 68°F/20°C.
1
2
HIGH LOW ECO
1
26
5
3
4
C B
C B
Loading ...
Loading ...
Loading ...