Loading ...
Loading ...
Loading ...
207
If You Have a Flat Tire
Taking Care of the Unexpected
(cont’d)
Installation
Install the side collars and position the
wheel and rear brake bracket.
While installing the wheel, carefully
fit the brake disc between the brake
pads to avoid damaging the pads.
Avoid getting grease, oil, or dirt on
the disc or pad surfaces. Any
contamination can cause poor brake
performance or rapid pad wear after
reassembly.
Remove the rear axle shaft ( ), rear
wheel, left chain adjustment plate ( ),
right chain adjustment plate ( ), rear
brake bracket and side collars from the
swingarm.
To avoid damage to the brake hose
during removal, support the caliper
assembly so that it doesn’t hang from
the hose. Do not twist the brake hose.
Avoid depressing the brake pedal
when the wheel is off the motorcycle.
This will force the caliper pistons out
of the cylinders. The result will be a
loss of brake fluid. If this occurs, the
brake system will require service.
See your Honda dealer for this
service.
1.
7. 5
7
6
０９／０７／０６ １８：５０：４３ ３１ＭＦＬ６２０ ０２１６
Loading ...
Loading ...
Loading ...