Loading ...
Loading ...
Loading ...
Operation instructions
Do not turn the vertical adjustment louvers manually, otherwise malfunction may occur. If that happens, turn off the
unit first and cut off the power supply, then restore power supply again.
It is better not to let the vertical adjustment louver tilt downward for a long time at COOLING or DRY mode to prevent
condensed water from dripping.
A
B
20
Press " " button again .
The louvers swing to a suitable angle as desired.
Result :
NOTE:If the unit doesn’t have four ways airflow function, you can adjust
horizontal airflow by yourself.(invalid for some models)
PRESS
Indoor temperature
Target temperature
21 70℃( ) or below°F
22 7℃( )2°F
26 7℃( )9°FOver 26 7℃( )9°F
21 3°F℃-23℃( )70°F-7
23 9°F℃-26℃( )73°F-7
Operation mode
HEATING
FAN ONLY
DRY
Room temperature
decrease 2 2°F℃( ) after
operate for 3 minutes
COOLING
Heat pump models
Cooling only models
Indoor temperature
Target temperature
23 7℃( ) or below3°F
26 7℃( )9°F
Over 26 7℃( )9°F
23 73°F 79°F℃-26℃( - )
Operation mode
FAN ONLY
DRY
Room temperature
decrease 2 2°F℃( ) after
operate for 3 minutes
COOLING
How to set SMART mode?
Press the button.
Result : Enters SMART mode(fuzzy logic operation)
directly only when the unit is on .
Temperature and fan speed are automatically
set based on theactual room temperature.
PRESS
SMART mode( )invalid for multi system
For the split-type models, such as wall-mounted air conditioners and some
floor-standing air conditioners, their operation mode and set temperature
should be determined based on the indoor temperature.
Operation mode and temperature are determined by indoor temperature
For commercial air conditioner products, such as cassette type air conditioners, duct type
air conditioners, ceiling & floor air conditioners and some floor-standing air conditioners,
their operation mode should be determined based on the difference between the indoor
temperature and set temperature.
Loading ...
Loading ...
Loading ...