Loading ...
Loading ...
Loading ...
18
I
CONVERSION PROCEDURE
Normal LPG to NG
Regulator - ensure
arrow is pointing
the right direction
Hose with tapered
thread - thread tape
required
• Disconnect and disassembled/remove trivet, burners etc.
• Remove regulator. Ensure provision is left for measuring gas pressure e.g test point. A
separate fitting may have to fitted.
• Remove injectors and replace with correct sizes for each burner.
• Adjust aeration (X) per every burner
• Re-assemble burners.
• Turn gas on and test for leaks, repair if necessary.
• Light the burners and set the pression to 1,00kPa.
• Turn burner “Low” setting and adjust setting accordingly.
• Chek operation of ignition etc.
• Ensure data plate is changed with the new data plates supplied in the product.
For Natural Gas connection a bayonet connection point should be installed by a licensed
gas fitter prior to installing the barbecue unit.
Loading ...
Loading ...
Loading ...