Loading ...
Loading ...
Loading ...
ACP
2-30
Setting the gateway address
2. Installing ACP
After setting the IP address, the gateway address should be set. Set the gateway address as follows:
1. Press the 'MENU/SELECT' button of the ACP and then press Left/Right ( , ) button to display
the following Gateway setup screen. Press the 'MENU/SELECT' button again. The screen to enter
the gateway address is displayed.
MENU/
SELECT
[MENU]
Set GW Address
[Set GW Address]
192.168.000.000
MENU/
SELECT
Click
MENU
/SELECT
button
Example to set Gateway address
[Set GW Address]
165.186.002.001
MENU/
SELECT
ACP
SW ver. 2.77.2
2. Use Up/Down/Left/Right ( ) button to enter the desired gateway address.
3. After entering the gateway address, press the 'MENU/SELECT' button to set the entered gateway
address. But, there is no 'MENU/SELECT' button pressed for a specific period (about 5 seconds), it
returns to the initial screen with the entered gateway address not applied to the system, and the
existing set gateway address is used.
Loading ...
Loading ...
Loading ...