Loading ...
Loading ...
Loading ...
English
39
USING THE PROJECTOR
3D Setup
1. Turn on your projector.
2. Connect your 3D source. For example, 3D Blu ray, Games console, PC, Set top box, etc.
3. Ensure you have inserted 3D content or selected the 3D channel.
4. Turn on your 3D glasses. Please refer to the 3D glasses user manual on how to operate the 3D
glasses.
5. Your projector will automatically display 3D from a 3D Blu ray. For 3D via a set top box or PC, you will
be required to adjust the settings in the 3D menu.
For 3D via Blu ray
3D will automatically be displayed.
Menu > "Display" > "3D" > "3D Mode" > "DLP-Link"
For 3D via a PC or Set top box
3D will not be displayed automatically. Depending on the 3D content the image will either be displayed side by side
or top and bottom. Please refer to the following table.
SBS SBS
Top and bottom
Top and bottom
For side by side images, select "SBS" in the menu. Menu > "Display" > "3D" > "3D Format" > "SBS".
For top and bottom images, select "top and bottom" in the menu. Menu > "Display" > "3D" > "3D
Format" > "Top and bottom".
If the 3D image does not look correct, you may also be required to adjust the 3D sync invert. Turn this
on if the image looks odd. Menu > "Display" > "3D" > "3D Sync Invert" > "On".
Note: If input video is normal 2D, please press “3D” and switch to “Auto”. If “SBS” mode is active, 2D video
content will not be displayed correctly. Please change back to “Auto” when 3D via a PC only works with
certain resolutions. Please check the compatibility on page 43.
Loading ...
Loading ...
Loading ...