Loading ...
Loading ...
Loading ...
4
Install the Play-Fi App if you haven’t already. If
only using AirPlay™, skip to the next section iOS
Connection Without Play-Fi.
For iOS users, open the Wi-Fi settings menu and
select the available network option that contains
“PlayFi2Device” in its name.
Run the Play-Fi App on your iOS, Windows or Android
Device.
Play-Fi should search for Play-Fi devices that are in
Setup mode (such as the RS200). If Play-Fi does not
automatically search, click on the settings icon
and then select “Set Up Play-Fi Device.” Then select
Search.
After a minute or so, the RS200 should be found. Enter
the Wi-Fi password for the network. The RS200 will
now be connected to the wireless network. If there are
software updates for the RS200 available, it may take
a few minutes.
Next, choose a name from the list or choose to create a
custom name to identify the RS200.
iOS Connecon without Play-Fi
With the NET LED pulsing slowly, open the Wi-
Fi settings. Scroll to nd Play-Fi device under “add
AirPlay Speaker below.”
Selecting the Play-Fi device will open a screen to add
the RS200 to a selected Wi-Fi network.
After selecting the Wi-Fi network, it will take a moment
and then a message should display that the AirPlay
Speaker was successfully connected to the network.
WPS Setup
If your router supports Wi-Fi Protected Setup (WPS),
then you can use this method for connecting the RS200
to your network. WPS allows for a secure network
connection without needing to enter a password.
Place the RS200 near the router. It can be moved after
setup.
Place the RS200 in WPS mode by pressing and holding
the Wi-Fi symbol in the center of the LEDs on
the top front of the RS200 for 3 seconds. The symbol
should begin to blink twice and then pause every
second.
Now push the WPS button on your router. Once the
automatic connection has completed, the Wi-Fi symbol
should now be a solid, non-blinking, green.
Launch the Play-Fi App to complete the setup. The
RS200 should be recognized and you will be able to
name the unit.
More about Play-Fi
Play-Fi is a premium whole-home wireless audio
system created by DTS and licensed by McIntosh. The
goal of Play-Fi is to provide seamless interoperability
between speakers in many locations with numerous
streaming services. The streaming landscape is an
everchanging ecosystem, and the folks at DTS are
working hard to both maintain quality service as well
as incorporate advances in streaming technology.
Over time your Play-Fi App will change and improve.
Play-Fi’s features and function are completely in the
hands of our friends at DTS. You can nd the latest
information in the knowledge base at play-.com.
The Wi-Fi Connecon
Get the Play-Fi App
The Play-Fi App allows you to stream music from your
Apple and Android devices as well as any sound from
your Windows PC to your RS200 (as well as any other
Play-Fi speaker).
First, download the appropriate version of Play-Fi. For
Android, go to the Google Play Store; for Apple, go to
the Apple App Store, and the Windows version can be
downloaded from https://play-.com/apps/windows/.
The next step is for Play-Fi to connect the RS200 with
your wireless network. After initial setup, the RS200
will automatically link with your network.
Wi-Fi Setup
Place the RS200 in Setup Mode by pressing and
holding the Wi-Fi symbol in the center of the
LEDs on the top front of the RS200 for eight seconds.
A tone will sound.
Figure 1– AC Power Inlet
Power Connecon
Before the RS200 can stream wireless music, one cable
must be connected– the AC power cord. The supplied
AC power cord connects to the AC Power inlet in the
top right corner of the rear of the RS200 (looking at
the back).
Figure 2– Wi-Fi Button
Connect AC Power
Cord to AC Power
Inlet
Loading ...
Loading ...
Loading ...