Loading ...
Loading ...
Loading ...
2. Setting Up the Unit
Once the machine has powered on, you will see the following display:
U
N
I
T
O
N
0 0 0
H R
S
I N L E T
0 0
C
0 0
%
a. UNIT ON- means the unit is powered on
describes any time the machine is running from power on to power off. It includes
defrosting time, but does not include the standby time once the set point is reached. The
working time can be reset using the sub-menu. If it is never reset, the time will accumulate
with a maximum time of 99.9 hours. Once the maximum is reached, it will reset to zero.
b. 00.0HRS-
c. INLET 00°C00%”
°
desrcibesthe temperature and humidity of air inlet. You can switch the
temperature measurement ( F/ C) in the sub-me° ° nu.
d. When operating in the sub-menu, press the power key to return to the main menu.
3. Defrosting Screen
When the unit enters defrosting mode, it will show "Defrost 000". This is the countdown
until defrosting is finished. After defrost is completed, it will return to the main interface.
NOTE: If you are in a submenu, you will not see the countdown until you return to the main interface.
U
N
I
T
O
N
0 0
H R S
D E F R
O
S T
0 0 0
If you decide to power the machine o ffwhile it is defrosting, you will see "Wait for
Defrost" on the screen. This indicates that the unit will power o ffafter defrost is
completed.
W A I T F
O
R
D E F R
O
S T
0 0 0
4. Compressor
This screen indicates the amount of time until the compressor starts running.
P L E A S E W A I T
C
O
M P . D E L A Y
0 0 0
5. Pump
This screen indicates how much time is remaining before the pump has completed
working. The countdown will start at 14 seconds
P
U
M P P
U
R G I N G
0 0
Loading ...
Loading ...
Loading ...