Loading ...
Loading ...
Loading ...
Troubleshooting
Dehumidifier Storage
Symptom
Cause
Solution
Display is Blank
No Airflow
Error Code:E1
Error Code:E4
Error Code:LO
Error Code:HI
E5 Error Code
Poor Connection
Power Outage
Filter is Dirty
Air lnlet or OutletisBlocked
HumiditySensoror
Communication Error
Problem with Pump
Room Temperature is below
33.8°
Room Temperature is above
110°
Refrigerant Leak
Verify that both ends of the
Power cord are plugged in
Reset power
Clean the filter
Clear the blockage
Check to ensure that the sensor
wire is connected at both ends.
if no issues are visible, the
sensor may be faulty.
Verify that the pump is properly
installed and functioning. If so,
unplug the unit for two minutes,
then restart.
Increase the room temperature
so it is within operating range
(above 33.8 ).If er ror still
displays, check sensor.
°
Decrease the room temperature
so it is within operating range
(below 110 ). If er ror still
displays, check the sensor
°
Contact Your Installer for
Assistance
1. Turn o ffthe unit and allow it to to dry.
4. Cover filter mesh.
2. Clean out the pump reservoir.
5. Store in clean,dry space
3. Wrap and secure the power cord.
If the unit will be stored for an extended period of time, complete the following steps:
Loading ...
Loading ...