Loading ...
Loading ...
Loading ...
Maintenance Instructions
Before Use
Check the power cord for signs of damage such as fraying. Replace the cord before use if
there is any damage.
Check the filter for signs of dirt or obstructions. Clean or replace the filter as necessary
Check the coils for signs of buildup. Clean if needed.
Cleaning the Machine Body
Use a soft, damp cloth to clean the exterior of the unit. Do not use any soap or solvents.
Filter Maintenance
1. Unplug the unit.
2. Slide out the filter.
3. Check the filter for dirt
and buildup.
4. For a Pre- Filter or MERV-8:
Clean the filter mesh by
vacuuming it or washing with warm
water (no soap or cleaners).Gently shake the filter dry,
then reinsert it.
5. For a Carbon, or HEPA Filter:
If there is dirt or buildup, replace filter.
Removing the Housing
1. Remove the screws on the housing.
2. Extraction screen.
Coil Maintenance
Once per year, clean the coils with an approved coil cleaner.
Coil cleaner should be a self-rinsing, foaming cleaner such as WEB® Coil
Cleaner.
Pump Maintenance
Pump Access:
Remove the screws on the housing, then lift off. Unplug the pump drain line, then remove the
screws holding the pump in place.
Cleaning the Pump Reservoir:
Once the screws are removed, lift o ffthe top of the pump and set aside. Use a paper towel to
wipe out the base of the pump.
3. Open the shell.
Loading ...
Loading ...
Loading ...