Loading ...
Loading ...
Loading ...
7. CHILD SAFETY
11 GB
6. PYROLYTIC CYCLE
**O must have function
The oven is equipped with a pyrolyser cleaning system, which
destroys food residues at high temperature.The operation is carried
out automatically by means of the programmer.The resulting fumes
are rendered “clean” by passing over a Pyrolyser wich starts as soon
as cooking begins. As very high temperatures are required by the
Pyrolyser, the oven door is fitted with a safety lock.
The pyrolyser can be stopped at any time. The door cannot be opened
until the safety lock is displayed.
NOTE : If a hob has been fitted above the oven, never use the gas
burners or the electric hot-plates while the Pyrolyser is working, this
will prevent the hob from overheating.
TWO PYROLYTIC CYCLE are pre-set.
. ECO PYROCLEAN : Cleans a moderately stained oven.Operates
for a period of 65 minutes.
. SUPER PYROCLEAN : Cleans a heavily stained oven.Operates for
a period of 90 minutes.
Never use commercially available cleaning products on a
Pyrolytic oven !
Tip : Carrying out Pyrolytic cleaning immediately after cooking allows
you to take advantage of residual heat, thus saving energy.
Before carrying out a Pyrolytic cycle :
•Remove all accessories from the oven : They cannot withstand the
high temperatures and would be damaged by pyrolytic temperatures.
•Remove any large spillages or stains as it would take too long to
destroy them. Also excessively large amounts of grease could ignite
when subject to the very high temperatures of the Pyrolyticcycle.
•Close the oven door.
•excess spillage must be removed before cleaning
At the end of the cycle, the indicator flashes again, it will remain also
turned on after having extinguished the oven and it will estinguish
when the inside temperature of the oven is sufficiently low.
Pyrolysis leaves a white residue on the oven walls. Wait for the oven to
cool completely then clean the inside of the oven with a damp sponge
to wipe off the residue.
ven this
1- Rotate the function selector to the position . On the display,
appears the indication " ECO " or " SUP "
2- The preset time is 65min, this can be varied from 65min (Eco
mode) to 90min (Sup mode) via the programmer (setting
button " + " or " - "). If the oven is very dirty, it is recommend o
increase the time to 90min, if the oven is moderately dirty reduce
the cleaning cycle time to 65min.
3- It is possible to delaythe start time of the pyroclean cycle by
changing the END time via the programmer.
4- After few minutes, when the oven reaches a high temperature,
the door will lock automatically.
5- The pyroclean cycle can be stopped at any time by turning the
function selector back to '0'.
6- Once the pyroclean cycle has finished, the pyrolysis will switch
off automatically. On the display appears the indication " END
"and "
0 - - n " until the door is locked.
7- Turn the function selector back to "
0 " , if the temperature is still
high, the "
0 - - n " indication appears to advise that the door is
locked.
This function is essential, especially when children are around. It
prevents children from switching the oven on or altering the preset
programmes.
This safety system locks the oven control panel while it is operating.
There are two levels of safety :
LEVEL 1 : Locking selector control knob and the central button.
•To activate : Turn the programmation control knob to child safety.
•Action : The control knobs are inactive*.
•To deactivate : Turn the programmation control knob to 0.
LEVEL 2 : Locking function selector knobs
•To activate : Turn the function selector knob to child safety and keep
the central button pressed in for 3 seconds.
•Action : All the controls are inactive*.
•To dactivate : the same procedure as for activating. Turn the function
selector knob to child safety and keep the central button Pressed in for
3 seconds.
*Note : In all cases, for reasons of safety, even when the controls are
locked, the oven can be switched off by turning the selector knob to 0.
Loading ...
Loading ...
Loading ...