Loading ...
Loading ...
Loading ...
12
Resetting The Remote Control
1. Set the power switch to remote control position “ ”. (fig. 1)
2. Press the RESET button on the side of the power head with a pen tip until the indicator lights up. (fig. 2)
3. Within the 15 seconds, press and hold the “ON” or “OFF” button on the remote control. If you didn’t
press and hold the “ON” or “OFF” button within the 15 seconds, it will cancel this resetting. (fig. 3)
4. When the light blinks 3 times, this means the remote control is programmed.
Changing The Battery – Replace Only With A 23AE 12V Alkaline Battery
1. Take a Phillips Screw driver and remove the screws on the remote control. (fig. 1)
2. Slide the remote control forward so the arrow point is over the unlock symbol “ ” . (fig. 2 & 3)
3. Remove the remote control from the handle. (fig. 4)
4. Remove the old battery and insert the new battery with the terminals in the direction shown. (fig. 5)
5. Return the remote control to the handle by aligning the arrow point on the remote control over the unlock
symbol “ ” . (fig. 6)
6. Slide the remote control back until it arrow point on the remote control is aligned with the lock symbol
“ ” . (fig. 7 & 8)
7. Secure the cover with the screws. Do not over tighten. (fig. 9)
RESETTING THE REMOTE CONTROL
Loading ...
Loading ...