Loading ...
Loading ...
Loading ...
Set-Up
Read the entire manual before setting up the treadmill. Place the treadmill where it will be used before beginning
the setup procedure.
Electrical Power Requirements
The treadmill requires a dedicated* line with isolated neutral according to the electrical configurations listed in
the chart below.
Consumer / Home Units Outlet
& Breaker (Amps)
Commercial Units Outlet
& Breaker (Amps)
Frequency (Hz)Supply Voltage
152050 / 60100 / 120
101050 / 60200 / 220 / 230 / 240
* Commercial Units Only: One individual branch circuit for each treadmill per NEC article 210-21 (b) (1) and 210-22
(or other appropriate, country specific electrical compliance guidelines). The hot and neutral wires must each be
routed independently (not looped or tied to other circuits).
Note: Do not modify the plug provided with this product. If the plug does not fit into an available electrical
outlet, have a proper outlet installed by a qualified electrician.
Grounding Instructions
This product must be properly grounded. If the unit malfunctions or breaks down, proper grounding provides a
path of least resistance for the electric current, which reduces the risk of shock to anyone touching or using the
equipment. Each unit is equipped with an electrical cord, which includes an equipment grounding conductor and
a grounding plug. The plug must be inserted into an outlet that has been properly installed and grounded in
accordance with all local codes and ordinances.
Warning: A temporary adapter MUST NOT BE USED to connect this plug to a two-pole receptacle in North
America. If a properly grounded, 20-amp outlet is not available, one must be installed by a qualified electrician.
Models drawing 16 amps or more must be installed on a dedicated line. (Commercial Units Only).
AVERTISSEMENT: Si vous êtes aux États-Unis, n’utilisez PAS d'adaptateur temporaire pour raccorder la
fiche à un adaptateur bipolaire. Si aucune prise de 20 A correctement mise à la terre n'est disponible, il
convient d'en faire installer une par un électricien qualifié. Les modèles utilisant 16 A ou plus doivent être
installés sur des lignes qui leur sont réservées. (Gamme commerciale uniquement).
Warning: A temporary adapter MUST NOT BE USED to connect this plug to a two-pole receptacle in North
America. If a properly grounded, 15-amp outlet is not available, one must be installed by a qualified electrician.
(Consumer Units Only).
AVERTISSEMENT: Si vous êtes aux États-Unis, n’utilisez PAS d'adaptateur temporaire pour raccorder la
fiche à un adaptateur bipolaire. Si aucune prise de 15 A correctement mise à la terre n'est disponible, il
convient d'en faire installer une par un électricien qualifié. (Gamme grand public uniquement).
Danger: A risk of electrical shock may result from improper connection of the equipment-grounding
conductor. Check with a qualified electrician if in doubt as to proper grounding technique. DO NOT modify
the plug provided with the product. If it will not fit an electrical outlet, have a proper outlet installed by a
qualified electrician. Any modification to the electrical plug will result in a voided warranty.
Danger.: Un branchement incorrect du fil de terre peut entraîner des risques de choc électrique. Consultez
un électricien si des doutes subsistent quant à la technique de mise à la terre. NE MODIFIEZ PAS la fiche
fournie avec l'appareil. Si cette dernière n'entre pas dans la prise, faites effectuer l'installation par un
technicien qualifié. Toute modification de la fiche entraînerait une annulation de la garantie.
Page 9 of 31
Loading ...
Loading ...
Loading ...