Loading ...
Loading ...
Loading ...
Power Switch
Located on the front panel at the base of the treadmill, the ON/OFF switch has two positions: "l" (one) for ON and
"0" (zero) for OFF.
Turning the Unit On
To turn the treadmill on, locate the ON/OFF power switch at the front of the treadmill and turn it ON.
Power Cord Routing
Warning: Make sure the power cord is unplugged before attempting to route it around or through the
treadmill.
The power cord can be run to the user-front left or right sides. Excess power cord can be bundled and tied to the
pre-installed clips located under the front of the treadmill. The power cord can be run to the rear of the treadmill
through the left side rail. The power cord should run under the left upright cover and into the internal channel of
the left side rail as shown.
Qty.DescriptionItem
1Power Cord1
1Left Siderail2
1Frame3
1Lift Arm4
2Wheel5
Note: To accommodate treadmill incline, at least 2 ft. (24”) of power cord is required between the outlet
and the last power cord clip for outlets in front of the treadmill.
Warning: Keep the area 6.5 ft. (2 m) by 3 ft. (0.9 m) behind the treadmill clear of any obstructions, including
walls, furniture, and other equipment. Contact Customer Support Services for an optional longer power cord
if necessary.
Danger: Ensure that the power cord does not contact the striding belt or get pinched between the frame,
lift arm or under the wheels; failure to follow this warning may result in serious injury.
Danger.: Assurez-vous que le cordon d’alimentation n’entre pas en contact avec le tapis et ne soit pas pincé
entre le cadre, le bras de levage ou sous les roues. Le non respect de cet avertissement peut provoquer de
graves blessures.
Immobilization Method - 50L Console
The purpose of immobilizing the treadmill is to prevent unauthorized use. The system causes immobilization of
the treadmill when a pre-defined hard key sequence has been activated.
To prevent false toggling of the Immobilized feature, this sequence must be done in a 5-10 second period.
1. Press the STOP key 3 times.
Page 11 of 31
Loading ...
Loading ...
Loading ...