Loading ...
Loading ...
Loading ...
Installation and connection
94
Connection to the water supply
Risk of electric shock!
There are electrical wires in the water
inlet hose.
The inlet hose must not be
connected in an area subject to
spray water, e.g. in a bathroom or
shower room.
The casing on the water inlet hose
must not get wet.
The protective sleeve must not be
damaged or kinked.
The washing machine must be
connected to a mains water supply in
accordance with current local and
national safety regulations.
IMPORTANT Australia and New
Zealand
This appliance must be installed
according to AS/NZS 3500.1. Backflow
prevention is already integrated in the
appliance.
The flow pressure must amount to a
minimum of 100kPa (1bar) and must
not exceed an overpressure of
1000kPa (10bar). If it is higher than
1000kPa, a pressure reduction valve
must be installed.
Connection to the mains water supply
should incorporate a water tap with a
¾" threaded union. If this is not
available, only a qualified installer may
connect the washing machine to the
mains water supply.
The connection point is subject to
mains water pressure.
Turn on the tap slowly and check for
leaks. Correct the position of the
washer and union if necessary.
Loading ...
Loading ...
Loading ...