Loading ...
Loading ...
Loading ...
The ideal temperature and humidity
65
Isolator panels for thermal separation
The Wine Storage Unit has two fixed
isolator panels that divide the interior
into three zones, which can be condi-
tioned in different ways. This means
that you can store up to three different
types of wine at the same time – for ex-
ample, red wine, white wine, and cham-
pagne.
Setting the temperature
Touch the symbol for setting the
temperature in the display.
The previously set temperatures are dis-
played.
Use the and arrow buttons to
select the temperature of the required
wine conditioning zone and touch OK
to confirm your selection.
Use the and sensors to set the
temperature. Keeping your finger on
the sensor changes the temperature
continuously.
Confirm the temperature setting with
OK or wait approx. 8seconds after
touching the sensor for the last time.
This temperature will be automatically
adopted.
Tip: The new temperature setting can
also be confirmed and adopted by clos-
ing the appliance door.
The temperature display always shows
the required temperature.
If you have adjusted the temperature,
wait for approx. 6hours if the Wine
Storage Unit is not very full and for
approx. 24hours if the Wine Storage
Unit is full before checking the temper-
ature display. It will take this long for an
accurate reading to be given.
If, after this time, the temperature is
still too high or too low, adjust it
again.
Temperature range
In all three zones, it is possible to set
temperatures between 41°F and 68°F
(5°C and 20°C).
Loading ...
Loading ...
Loading ...