Loading ...
Loading ...
Loading ...
Installing the wine conditioning unit
Pushing the wine conditioning
unit into the niche
Then push the wine conditioning unit
into the niche, taking care not to
damage the electrical cord.
If you are installing several appliances
side by side, now secure the appli-
ances to one another (see the instruc-
tions for the side-by-side installation
kit).
Remove the baseboard from the
appliance base as follows:
Carefully guide a flat-head screw-
driver through the grate in the base-
board on both sides and use it to
push the internal plastic latches out-
wards to release the baseboard.
5
Affix edge protection to the adja-
cent cabinet fronts.
Insert the plug connector at the back
of the appliance (see “Electrical con-
nection”).
Insert the plug into the electrical
outlet.
The electrical outlet should be close
to the appliance and easily accessi-
ble!
Otherwise, it must be possible to
switch the appliance on and off us-
ing an external all-pole switch with a
sufficient contact gap!
Risk of short circuit and over-
loading!
When installing appliances side by
side, each appliance must have its
own separate electrical outlet.
28
Loading ...
Loading ...
Loading ...