Loading ...
Loading ...
Loading ...
Installation information
16
Installation notes
Load-bearing capacity of the niche
floor
To ensure the safe installation of the
wine conditioning unit and to guarantee
its correct functioning, the floor of the
niche where the appliance is to be in-
stalled must be smooth and even.
It must be made from strong, rigid ma-
terial.
The wine conditioning unit is extremely
heavy when fully loaded, and the floor it
stands on must be able to bear its
weight. If necessary, seek the advice of
an architect or structural engineer.
When fully loaded, the weight of the
wine conditioning unit is approx.:
Door hinge
The wine conditioning unit is sup-
plied with a fixed hinge. If you need
to change the door hinge to the other
side, please contact the Technical
Service department.
On no account should you attempt
to change the door hinge yourself.
Adjoining cabinets/units
The wine conditioning unit is screwed
to the adjoining cabinets/units to the
side and above. For this reason, it is es-
sential that all cabinets/units are fixed
to the ground and/or wall.
Ventilation
WARNING! Fire hazard!
Operation of the wine conditioning
unit is limited. Keep the required ven-
tilation gaps free from obstruction.
If the required ventilation gaps
are not left unobstructed, the com-
pressor will switch on more often
and will run for longer periods.
This causes increased energy con-
sumption and an increased com-
pressor operating temperature,
which can result in damage to the
compressor.
Do not block the ventilation gaps.
They must also be cleaned on a reg-
ular basis to remove dust.
KWT 26x1 SFS
(70
6 kg)
1556 lbs
Loading ...
Loading ...
Loading ...