Loading ...
Loading ...
Loading ...
Operation
47
Setting the
dispensing
concentration
For information about setting the dispensing concentration, see
"Additional settings / Additional functions / Dispensing systems".
Refilling or
changing
containers
The DOS module is equipped with a level monitor which shows a
message in the display when the amount drops below the minimum
level.
K
OK
Refill DOS
As soon as the message appears in the display, refill or replace the
container with a full one at the end of the program.
Acknowledge the message with the OK button.
Replace the container in good time to prevent the dispensing
system being emptied completely.
An empty dispensing system must be vented before the next
program is started.
Place the container on the open cabinet door or on a surface which
is easy to clean.
Unscrew and remove the siphon. Place the siphon on the open
cabinet door.
Replace the empty container with a full one.
Push the siphon into the opening of the container and screw it on
tightly. Be sure to observe the color coding.
Wipe up any spilled process chemicals thoroughly.
Place the container on the floor next to the dishwasher or in an
adjacent cupboard. The container must be on the same level as the
dishwasher. It must not be placed higher than the dishwasher or on
top of it.
The DOS system must then be vented.
Loading ...
Loading ...
Loading ...